JOFEN E-Scooter 5A/3A Fast Charger for T6 & T10

Choose the charger specification for your JOFEN scooter. All options on this page are supplied with an AU plug (Type I).

Model compatibility: 60V 2A and 60V 5A are for the JOFEN T10 only. 48V 2A, 48V 3A and 48V 5A are for the JOFEN T6 only. Select the correct model and charging specification before purchase.

Charging-time guide: These are estimates for charging the standard 18Ah battery from a low charge level to full with one charger. Actual charging time varies with the starting battery level, temperature, battery condition, and reduced charging current near full charge. Different battery capacities will have different charging times. These estimates are not measured charging-time guarantees.

60V 5A Fast Charger (T10)

Compatibility: JOFEN T10 only.

• Fast 5A Charging Performance
  Delivers high-current 5A output for significantly faster charging compared to standard chargers, reducing downtime and getting your JOFEN T10 back on the road quicker
• Australian Plug (Type I)
  Supplied with an AU standard plug for Australian household outlets.
• Optimized for 60V Battery System
  Designed specifically for 60V lithium battery systems, providing a balanced combination of charging speed and battery protection to maintain long-term performance.
• Direct Replacement & Upgrade Option
  Perfect replacement for lost, damaged, or unstable chargers. Also an ideal upgrade from lower-amperage chargers for improved efficiency without compromising safety.
• Genuine JOFEN Compatibility
  Engineered for seamless plug-and-play use with the JOFEN T10 electric scooter, ensuring reliable connection, stable performance, and safe operation under normal conditions.

60V 2A Original Charger (T10)

Compatibility: JOFEN T10 only.

The JOFEN T10 60V Smart Charger is the original OEM charging unit designed exclusively for the JOFEN T10 electric scooter. It connects directly to the scooter’s charging port and delivers matched charging power for the scooter's 60V battery system with intelligent voltage regulation and automatic cut-off to protect the battery from overcharging or overheating. This charger is installed by plugging it into the scooter’s dedicated charging port, typically located near the rear fender or under the deck.

Replace this charger if the original unit is lost, damaged, or no longer holds a charge — or if you notice inconsistent charging behavior, excessive heat during use, or failure to power on. As a smart charger, it includes built-in safety features like short-circuit protection, temperature monitoring, and adaptive charging stages to extend battery lifespan.

This is a genuine JOFEN replacement part with direct plug-and-play compatibility for the T10 model — no modifications or adapters required.

Charging current: 2A. Supplied with an AU plug (Type I).

48V 2A Original Charger (T6)

Compatibility: JOFEN T6 only.

This is the original JOFEN 48V 2A charger designed specifically for the JOFEN T6 electric scooter. It connects to the scooter’s charging port—typically located near the stem base or under the deck—and delivers power to recharge the battery pack safely and efficiently. The charger includes built-in protection against overvoltage, overcurrent, and overheating to ensure reliable daily use.

Replace this charger if it fails to power on, shows inconsistent LED indicators, no longer charges the battery fully, or if the connector is physically damaged or loose. It is not compatible with other voltage systems (e.g., 36V or 52V scooters) and should only be used with the specified JOFEN T6 model to avoid battery damage.

This is a genuine JOFEN replacement charger with direct plug-and-play compatibility for the JOFEN T6—no adapters or modifications required.

Charging current: 2A. Supplied with an AU plug (Type I).

48V 3A Fast Charger (T6)

Compatibility: JOFEN T6 only.

• 3A Super Fast Charging Performance
  Delivers efficient 3A fast charging output to reduce charging time compared to standard chargers, helping you spend less time waiting and get your JOFEN back on the road faster.
• Designed for 48V Electric Scooter Systems
  Specifically designed for 48V electric scooter battery systems, providing matched charging performance for safer, more stable, and more efficient everyday charging.
• Built-in Safety Protection with Reliable Performance
  Equipped with multiple safety protections including overcharge protection, short circuit protection, and overheat protection. Built with high-quality components to ensure stable output, dependable operation, and long-lasting durability.
• Australian Plug (Type I)
  Supplied with an AU standard plug for Australian household outlets.
• Perfect Replacement for JOFEN T6 Charger
  An ideal replacement for lost, damaged, or unstable chargers. Designed for seamless compatibility with the JOFEN T6 electric scooter, offering convenient plug-and-play charging.

48V 5A Fast Charger (T6)

Compatibility: JOFEN T6 only.

• Fast 5A Charging Performance
  Delivers high-current 5A output for significantly faster charging compared to standard chargers, reducing downtime and getting your JOFEN T6 back on the road quicker
• Australian Plug (Type I)
  Supplied with an AU standard plug for Australian household outlets.
• Optimized for 48V Battery System
  Designed specifically for 48V lithium battery systems, providing a balanced combination of charging speed and battery protection to maintain long-term performance.
• Direct Replacement & Upgrade Option
  Perfect replacement for lost, damaged, or unstable chargers. Also an ideal upgrade from lower-amperage chargers for improved efficiency without compromising safety.
• Genuine JOFEN Compatibility
  Engineered for seamless plug-and-play use with the JOFEN T6 electric scooter, ensuring reliable connection, stable performance, and safe operation under normal conditions.